Store Phone Number
Call Us Today
(508) 485-1176
 

Call or email us for our pricing on this product.
Phone: (508) 485-1176




Unable to submit your request. Please, try again later.

Schlage ES-6400 Series Modular Electric Strike for Mortise or Cylindrical Locksets

Product No. SCH-6400-STRIKE
MPN:ES-6400-US32D

Be the first to review this product

$448.00 $280.54
 
 

Availability: Available for Order

 
Schlage 6400 Series Modular Electric Strike

More Views

  • Schlage 6400 Series Modular Electric Strike
 
 
The ES-6400 fire rated strike from Schlage combines strength and convenience in an “all in one” compact, easy to install design. The ES-6400 is UL listed for 1500 lb. static strength. The unique design of the ES-6400 allows the installer to move the deadbolt keeper or plug and deadlatch ramp vertically to align with a wide variety of mortise locks with offset latches. This combined with a 1/8” horizontal adjustment provides a highly flexible and easy to install design while also eliminating the need for special face plates. A trim plate for frame cuts and a hands-free adhesive paper template are provided to simplify installation. Additional flexibility is provided by a “plug in” latch monitor switch that can be added in the field at any time after installation. The power failure mode of the ES-6400 is fail secure only for fire rated openings. In a fail secure application the door is normally locked without power. To unlock the door power must be applied. The voltage of the ES-6400 is also field selectable 12 or 24 VDC and 12 to 24 VAC.

Features and Benefits

• Vertical adjustment of the deadbolt keeper or deadlatch ramp allows for alignment with a wide variety of mortise locks with offset latches

• Field selectable voltage 12 or 24VDC and 12 to 24VAC

• Accommodates 3/4” latch projection

• Centerline face plate included for centerline entry

• Accommodates up to 1” deadbolt (for night latch application only, bolt will not release)

• Horizontal adjustment of up to 1/8” for misaligned frames

• Heavy duty stainless steel construction

• Plug connectors are furnished for ease of installation and removal during strike servicing

• Optional plug-in latch monitor can be added in the field

• Non-handed design provides greater flexibility

• Tamper-resistant screws included

• Hex and security driver bit included

• Low current draw (0.19 amps @ 24 VDC)

• Unique solenoid design prevents keeper from heating up

• Trim plate included

• Adhesive paper template included

• UL listed for 1500 lb. static strength, UL 1034 burglary-resistant listed & UL 10 C 3 hour fire-rated (fail secure only)

• Meets BHMA A156.31, Grade 1 for endurance and strength

• Static strength 1300 lbs.

• Dynamic strength 70 ft-lbs.

• Endurance 1,000,000 cycles