Conversion Plate, Mortise Lock 86 Cut Out to 161 Cylindrical Latch, 8" by 1" Steel, Prime Coat Finish
CV-138-PC Don Jo Hinges, Pivots and Hardware
Regular Price $45.00 -44% Special Price $25.20
Availability: Available for Order
SKU
DONCV138PC
CV-138-PC Don Jo Hinges, Pivots and Hardware is available to buy in increments of 1
Conversion Plate, Mortise Lock 86 Cut Out to 161 Cylindrical Cut Out, 1-3/8" Doors, 8" by 1" Steel, Prime Coat
Description
Specifications
| Series | Don-Jo Door Pulls, Push and Pull Plates |
|---|---|
| Vendor | Don Jo |
| Manufacturer | Don Jo |
| Color | Primed for Painting |
| Installation | Commercial |
| Limited Warranty | 1 Year |
| Finish Family | Primed |
Details
Handles, pulls, latches, locks, and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require tight grasping, tight pinching, or twisting of the wrist to operate.
Handles, pulls, latches, locks, and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require tight grasping, tight pinching, or twisting of the wrist to operate. Lever-operated mechanisms, push-type mechanisms, and U-shaped handles are acceptable designs. When sliding doors are fully open, operating hardware shall be exposed and usable from both sides. Hardware required for accessible door passage shall be mounted no higher than 48 in. (1220 mm) above finished floor.